The TRU-BALANCE K-6030 Complete Truck Wheel Centering Kit provides a permanent wheel centering solution for heavy-duty trucks equipped with aluminum steer wheels and aluminum/aluminum dual drive wheels. The kit centers the steer axle wheels and compatible steer brake drum using B-1504-GA sleeves, while C-5003-AA sleeves center the inner and outer drive wheels without centering the drive axle brake drums. One pre-packaged kit provides components for a three-axle truck.
Product Specifications
| Product Number | K-6030 |
| Product Type | Complete Truck Wheel Centering Kit |
| Truck Coverage | One 3-Axle Truck (Steer & Both Drive Axles) |
| Steer Wheel Configuration | Aluminum Wheels |
| Drive Wheel Configuration | Aluminum Inner / Aluminum Outer |
| Steer Axle Brake Drum Hole Diameter | 1.25 inches |
| Steer Axle Brake Drum Hole Depth | 0.50 inches (1/2") |
| Steer Axle Centering | Wheels & Compatible Brake Drum |
| Drive Axle Centering | Inner & Outer Wheels Only — Does Not Center Brake Drums |
| Steer Axle Components | B-1504-GA Permanent Centering Sleeves |
| Drive Axle Components | C-5003-AA Permanent Dual-Wheel Centering Sleeves |
The K-6030 is designed for aluminum steer wheels and aluminum/aluminum dual drive wheels. Verify the following before ordering:
- Steer Axle: Requires a 1.25" brake drum hole diameter with 0.50" hole depth.
- Drive Axles: C-5003-AA sleeves center the aluminum inner and outer wheels only. Drive axle brake drum hole diameter and depth are not fitment requirements for brake drum centering because the drive brake drums are not centered by this kit.
Review the supported steer brake drum part numbers below and confirm wheel compatibility. Contact a TRU-BALANCE associate if assistance is needed.
Product Features
- Centers aluminum steer wheels and aluminum/aluminum dual drive wheels.
- Centers compatible steer axle brake drums.
- Provides wheel-only centering for both drive axles.
- One kit is designed to center the wheels on one three-axle truck.
- Uses permanent centering sleeves for applicable wheel assemblies.
- Includes a wire brush for preparation.
Kit Includes
| Quantity | Part Number | Description |
| 1 Package | B-1504-GA | Permanent steer wheel and compatible brake drum centering sleeves |
| 2 Packages | C-5003-AA | Permanent aluminum/aluminum dual-wheel centering sleeves — wheel-only application |
| 1 | X-1775-WB | Wire Brush |
Compatible Steer Axle Brake Drums — B-1504-GA
The following brake drum part numbers are listed as supported applications for the included B-1504-GA centering sleeves. The required steer brake drum hole diameter is 1.25" with a depth of 0.50".
| Manufacturer | Supported Brake Drum Part Numbers |
| Arvin Meritor | 53-123448-002 |
| Gunite | 3573X, 3596X, 3597X, 3598X, 3686X, 3687X, 3710X, 3721AX, 3726X, 3758X, 3774X, 3800X |
| Conmet | N/A |
| Motor Wheel Centrifuse | N/A |
| Webb | N/A |
Drive Axle Application — C-5003-AA
The included C-5003-AA sleeves are designed to center the aluminum inner and aluminum outer drive wheels. These sleeves do not center the drive axle brake drums. Therefore, there is no supported drive brake drum part number list for the wheel-only centering function of this kit.
Volume Discount
Buy 3 or more K-6030 kits and receive 10% off each kit.
Warranty
One year from the date of purchase against defects in materials or workmanship.
