A-1339
STEER AXLE
REUSABLE WHEEL
CENTERING PINS
CENTERING PINS
Steer axle only
3" pin length
22 mm studs
1.053"–1.063" wheel holes
19.5", 22.5", 24.5" wheels
SOLUTION A
REUSABLE WHEEL
CENTERING PINS
Precision wheel centering during installation.
Reusable centering pins designed to bring compatible heavy-duty wheels to true center using three centering points at the 12, 4 and 8 positions.
WHICH REUSABLE PIN DO I NEED?
Select the pin that matches your application. All TRU-BALANCE reusable centering pins use three centering points at 12, 4 and 8.
A-1573
STEER + DRIVE
REUSABLE WHEEL
CENTERING PINS
CENTERING PINS
Steer and drive axles
4" pin length
22 mm studs
1.053"–1.063" wheel holes
19.5", 22.5", 24.5" wheels
A-2666
WHEEL +
BRAKE DRUM
REUSABLE CENTERING PINS
Steer + drive + brake drum
5" pin length
22 mm studs
1.053"–1.063" wheel holes
1.00" brake-drum hole diameter
SAME TRUSTED QUALITY. DIFFERENT SOLUTIONS.
SOLUTION A
HOW IT WORKS
Three centering points bring the wheel to true center during installation.
THREE-STEP PROCESS
1
INSTALL THREE PINS
Thread three compatible Solution A pins onto the wheel studs at approximately 12, 4 and 8 o’clock.
2
CENTER THE WHEEL
As the wheel is installed over the three pins, the centering portions guide the wheel into a centered position.
3
SECURE, REMOVE & TORQUE
Install the lug nuts to the manufacturer’s specification while the pins are in place, remove the three reusable pins, then complete the manufacturer’s torque procedure.
THREE PINS. TRUE CENTER.
01
THREE CENTERING POSITIONS
Installed at approximately 12, 4 and 8 o’clock.
02
GUIDES THE WHEEL TO CENTER
The pins center the wheel during installation.
03
REUSABLE INSTALLATION TOOL
Designed for durability and repeated use.
04
PINS REMOVED AFTER INSTALLATION
Install lug nuts, remove pins, then complete the manufacturer’s torque procedure.
FITMENT REQUIREMENTS
Match the reusable pin to your axle and centering application.
| PIN | APPLICATION | LENGTH | KEY DIFFERENTIATOR |
|---|---|---|---|
| A-1339 | Steer axle | 3" | Steer-wheel centering |
| A-1573 | Steer + drive | 4" | Steer and drive wheel centering |
| A-2666 | Steer + drive + brake drum | 5" | Adds 1.00" brake-drum hole centering |
SIMPLE INSTALLATION
Three reusable pins. A straightforward installation process.
1
INSTALL & CENTER
Install three compatible centering pins at approximately 12, 4 and 8 o’clock. Progressively tighten the pins with a hand wrench only, then install the wheel over the pins.
2
SECURE THE WHEEL
Install the lug nuts to the manufacturer’s specification while the three centering pins remain in place.
3
REMOVE & TORQUE
Remove all three reusable centering pins, then complete the manufacturer’s specified torque procedure.
PROFESSIONAL-GRADE WHEEL CENTERING SOLUTIONS
LOOKING FOR ANOTHER APPLICATION?
EXPLORE MORE SOLUTION A OPTIONS
View additional reusable centering pins for specialized wheel and application requirements.
Showing 1 to 12 of 12 (1 Pages)